FREE CLASSIFIED ADS FOR MEMBERS ONLY

IF YOU HAVE A PROBLEM CONTACTING ANY OF OUR DAARA MEMBERS ABOUT THEIR ADS PLEASE E-MAIL daararacing@yahoo.com OR CALL 321-439-3813 AND WE WILL CONTACT THEM FOR YOU..


STOCKS & MODIFIEDS___FOR SALE___STOCKS & MODIFIEDS


NEW PRICE***Proven performer and race winner 1936 3 window coupe Chevrolet vintage oval race car..Many spare parts..Asking $7500 Contact Tim Brush @ 727-459-0780 or email t.brush@knology.net


NEW***Pinto modified with Troyer Chassis, Quick Change Rearend, Billy the Kid 355 Chevy engine..$8000.. Contact Hank Baker @ 386-527-9659


NEW***1936 Ford coupe former northern mod on a 1940 chassis and set up for big block..Radiator, drive shaft, 4 speed transmission, headers, motor plate and halibrand 4:11..Call after 5 please Dale "Rock" Reigle 941-915-5992


NEW***1967 CHEVY II SS VINTAGE STOCK CAR..ALL STEEL CONSTRUCTION, INCLUDING FULLY WELDED STEEL SHEET METAL INTERIOR & EXTERIOR EXCEPT GLASS HOOD, 12PT CAGE, 69 CHEVELLE full CHASSIS, 4WDB, LG FRANKLIN QC, PS, NEW GAUGES AND TATTLE TACH, ALL MSD IGN, HI TRQ MINI STARTER, CROSS OVER HEADERS AND FULL 3-1/2" OPEN EXH OUT BOTH SIDES, GREAT ON ASPH AS WELL AS DIRT..WILL NEED FRESH PAINT, A GOOD CLEANING AND SHORT BLOCK(blown)..IN STORAGE PAST FEW YEARS, HAS ALL NEW VORTEC TOP END,COMPCAM/ROLLER ROCKERS, HOLLEY 750 ,T-350, HAS MATCHING SNAP ON ROOF CANOPY, WAS BUILT RIGHT BY PRO'S IN 'O5/'06..PRICE REDUCED 3000.oo..W/O MOTOR PARTS...$3299.oo WITH/FIRM,CASH ONLY..Contact Johnny Clay at kissclay73@hotmail.com (Kissimmee, Florida) --(IF YOU HAVE A PROBLEM CONTACTING JOHNNY CONTACT THE CLAY FAMILY AUTO SHOP AT 1200 SOUTH JOHN YOUNG PKWY, KISSIMMEE 34741..M-FRI 9AM-4PM. 407-846-1962 AND ASK FOR JOHNNY CLAY' BROTHER JEFFREY.)


NEW***ORIG NORTH EASTERN VINTAGE SUPER MODIIED..COUPE BODY STILL IN FIRST STAGE OF MOCKUP..CAME FROM PA BY WAY OF TALLEDAGA..THE FRAME IS 2X4 SQUARE TUBE 108" WB, PS, 4WDB, PS, FIRE SYSTEM..REAL EARLY FORD TRUCK REAR END WITH FRANKLIN QC LG ALUM DRUMS AND FLOATER AXLES..THE FRONT AXLE ALSO HAS HD RACE HUBS ON IT....GM STEEL BELL HOUSING W/HD TRANS AND SHAFT INTACT, TORSION F&R. SUSPENSION, FRONT BUMPER ONLY THING BENT ON CAR..PRICE JUST REDUCED $1,200.oo FIRM/POSS TRADES CONSIDERED..Contact Johnny Clay at kissclay73@hotmail.com (Kissimmee, Florida)--(IF YOU HAVE A PROBLEM CONTACTING JOHNNY CONTACT THE CLAY FAMILY AUTO SHOP AT 1200 SOUTH JOHN YOUNG PKWY, KISSIMMEE 34741..M-FRI 9AM-4PM. 407-846-1962 AND ASK FOR JOHNNY CLAY' BROTHER JEFFREY.)


***1957 Chevy stock car #77 with a California Frame..It has been a race car all its life and comes with a 350 Small Block Chevy and 4 Speed Transmission..$4500 Firm..Contact Buddy Byles @ (904) 879-1256..


***Northeast modified B coupe, Fiberglass body, hood,and nose piece..Center seat and steering..New disc brakes all 4 courners with foot and hand brake..Wide five beadlocks all around..New shocks all around..New springs all around..Straight axle front end with coilovers..Griffin aluminum radiator, Sbc late model motor, new pistons and bearings, roller rockers with stud girdle,holley double pumper, msd 6al with 7700 chip and billet distributor, new clutch, three speed, torque tube, winters quick change, on leaf springs with jacking bolts, fuel cell with shut off and mechanical pump..Auto meter Tach with memory, voltmeter, oil pressure and water temperature. Car has an alternator and power steering..I purchased this car in Vermont without a motor..I brought it to florida and I am just getting it together..It is a fairly open cockpit and quite easy to get in and out of..It has a 16-17 inch seat..We plan to take it out and shake it down very soon, probably at Orlando..If anyone is interested..I would liike $6500 for it turnkey..Contact Joe Farnsworth @ 352-343-7926 or 802-291-1987..


***Dirt modified coupe from northeast..350sb Chevy v8, powerglide automatic, quick change rear, strait axle, coilovers, disc brakes, and wide five all around, good tires and wheels, fuel cell, aluminum radiator, aluminum seat with padding, 5 point harness, turn-key $5500 Contact Joe Farnsworth @ 352-343-7926 or 802-291-1987


***'37 Ford Modified with Troyer Chassis, Quick Change Rearend, Profile Steering,and R.P.M. Trans..$3900 less motor..Contact Hank Baker @ 386-527-9659 or e-mail baker5252@aol.com


***Northeast style dirt modified..Brand new race car was never raced and is somewhat incomplete although would be the perfect car for someone who wants a new piece with new parts..I was told this car was the last one off the assembly line in Marcus Hook before the company was sold to the Carman Wheel Company..The car is a 1994 and I bought the car in 1995 as a frame and body to run the Special Small Block division that Alex Friesen was creating..I have made it a roller..It has all of the new and good stuff including a narrow trac Winters rear with Wilwood hubs and brakes..New Jaz Fuel safe cell. New torsion bars (29") Double link torque arm..Aluminum Pro Shocks all the way around, Profile steering, Butler Seat with Upholstery, Johnson Transmission, All Pedals in car, Olsen Front end with Sanders Hubs and Dixon Wide-3 adaptors,Webster Radiator, Power Coated red frame and body still has plastic on it..All hardware is new..I want $4000 for this car. It does need bumpers and the powerplant, and the lines need to be completed but it is a great race car project for someone who has the time to finish it.. I also have a 358 T-Bag Motor for this car..It has a Cola Crank, Wiseco pistons, Oliver Rods, Real Good Bow Tie heads and Brodix manifold..I am asking $4000 for this motor..Have tons of related racing stuff for sale..Contact Geoffrey Yoder @ 904-531-9358 or Email gyoder@us.ibm.com


NEW PRICE***1967 CAMERO DRAG CAR ROLLER...SET UP FOR BIG BLOCK..INCLUDED IS HEADERS, GAGES, RADIATOR, 9" REAR, AND ROLL BAR IS ALREADY INSTALLED..$3500.00..LOCATED IN MIMS, FLORIDA..CONTACT HANK BAKER @ 386-527-9659


NEW PRICE***1980 YELLOW PONTIAC CUP CAR ROLLER..NEW CAR NEVER HAD AN ENGINE AND NEVER RACED..QUICK CHANGE REAR...SAME TYPE OF CAR PETTY FINISHED HIS CAREER IN...$3000.00...LOCATED IN MIMS, FLORIDA..CONTACT HANK BAKER @ 386-527-9659


NEW PRICE***Early '70 Chevy Chevette 2x4 framed Northern pavement modified with history 99.9% original..Car ran at Thompson, CT, Seaconk, MA, and Staford, CT..George Murry last driver..This car has never been painted..Have orginal M&H tires and wheels when the car was new..Located in Mims, FL..No motor..$4500.00--CONTACT HANK BAKER @ 386-527-9659


***1935 Ford coupe stock car..Raced early 1950s in Winchester Va. area.Original Flathead.Good floors..Doors work.Has roll cage and heavy bumpers..Not running..Front sheet metal available if you want to return it to the street..This is the real deal..$5500.00 Contact Mark Reardon @ 315-866-3072 or E-mail Reardoncar1@yahoo.com Other cars available..


***1932 "Vicky" Modified narrowd fiberglass body (Speedway Motors), Custom tubular offset chassis, w/ four wheel coil over suspension, Wide five racing wheels and NEW Hoosier Dirt tires, Disc brakes all new master cyls. And calipers / pads, 58 Chev. Pickup steering w/drag link pitman arm, 9" Ford narrowed rear end floating axels, 6.00 gear all new bearings, 78 Chev. 3 speed pickup transmission, Completely "FRESH" 78 Chevrolet 350 C.I. motor, w/ 68 "camel hump heads" Z-28 valve springs, roller rocker arms, 9:1 Compression w/ Elderbrock Torker manifold & New Holley 650 CFM Carb, All MSD ignition, distributor, coil, and 6AT box, All new clutch, pressure plate, w/ hydraulic slave cylinder, Full gauges, safety Fuel shut off & elect. Disconect and new safety belt assembly..Car has NEVER been raced and was on exibit at Zephyrhills in November. Engine has less than one hour run time...If the car is not sold by February, I hope to race it for first time at Zephryhills..The car is located in Lake Panasoffkee , FL..$10,500 (neg.)..Contact Donald E, Martin, Sr. @ 352-793-1721 or e-mail dmartinsr@ispfla.com

SPRINT & BIG CARS___FOR SALE___SPRINT & BIG CARS


NEW***Mid 70's J&J pavement sprint.Powdered coated frame,black base coat clear coat body panels,hand lettered,fresh 358 chevy small block,good crank,roller rockers,wysco pistons,billit rods,brodex heads,hillborn injectors,tri-drive pumps,inline fuel filters,hunt mag,fuel bladder-12qt. Dry sump,roll bar on car-cage can be remounted.Contact Vince Cappelli @ 941-315-0120.$ 15,500.00 OBO


***Street legal 60's era sprint car..New 350 late model motor @ 350 automatic transmission..Jones quick change.. Wired for the street..New wheels..$10,000..contact John Duryea @ 352-796-3279 or cell 352-544-8801


***Silver Crown car #35..6 inch Carillo rods, Ross pistons, Hilburn injection, Vertex mag, titanium intake valves, 95% complete..$7500.00

***BLUE CHAMP/SUPER MODIFIED..100 inch wheelbase, 1970's caged stock engine, new Rebore pistons, bearings, etc..power steering, Profile clutch unit, 10 pound Corvette flywheel..95% complete..$7500.00..contact Cal Kraemer @ 352-793-1637

MIDGETS___FOR SALE___MIDGETS


NEW***1939 Flat Tail Midget for Show or Race..Ford V8 60 Engine with 2 carb Edelbrock intake manifold (includes 4 carbs--2 show & 2 race set up), Offenhouser 9.5 CR heads (aluminum fin with water manifolds), Crank driven water pump, New fuel pressure hand pump Stewart Warner gauges, Frame up rebuild with grade #8, stainless hardware, Braded fuel and brake hoses..$13,500 with trailer ..Contact Tom Mylander (cell) 352-238-2826 or (home) 352-796-9853


NEW***1947 HILLIGAS MIDGET #24..All Alum Body, Ford V/8 60HP Engine w/Magneto, Eddie Meyer Dual Carb Manifold w/Stromberg 81 Carbs & New Washable Air Filters, Spencer Alum Finned Heads, Elect. Fuel Pump, 2 Sets 12" Weld Alum. Wheels w/New Dirt & Slicks, Knock-Offs, Hyd. Hand Brake, Leather Upholstery, Quick Release Steering Wheel, Spring Frt & Rear, A Lot of Chrome..Trailer w/Elect. Winch, Spare Tire, With Fold Down Ramp..$18,500..Contact Joe Wappman (cell) 352-293-5291 (home) 352-796-3324


NEW***1948 RAIL FRAME MIDGET #25..Ford V/8 Engine, Alum Finned Heads, New elect. Fuel Pump, Rare Alum Roof 2 Carbs Intake Manifold, 2 Stromberg 81 Carbs/W Washable Air Filters, 3 Speed Trans/W Reverse, Clutch, New Starter, Hand Brake, Quick Release Steering Wheel, Rear Disc Brakes, Cockpit Cover..$16,900..Contact Joe Wappman (cell) 352-293-5291 (home) 352-796-3324


1974 EDMONDS MIDGET #26..Won ARDC Championship (1974) With Driver-Leigh Earnshaw..Includes Trailer/w ToolBox & Remote Elect. Winch..2300-4cyl Ford Engine, Fuel Cell, 3 Speed Trans. With Reverse, Knock-Offs, Starter, Clutch, Tube Frame, Cross Tors, Susp. Frt. & Rear, New Crank Fired Ignition, System 4 Mikuni Carbs, w/K&N Airfilters, Cover, Cockpit Cover, Quick Release Steering Wheel, Halibrand Quick-Change Rear End, Elec.-Fuel Pump..$19,900.. Contact Joe Wappman (cell) 352-293-5291 (home) 352-796-3324


***VW POWERED EDMUNDS MIDGET READY TO RACE..CALL FOR MORE INFO..HAS TRAILER AND EXTRA WHEELS AND TIRES..$7500..CONTACT DALE MILLER (407) 330-4181.


***#37 orange and white, everything new including rebuilt engine $9500..Contact Bob Hall @ 704-732-1202 or 704-472-1700


***Red # 36, alcohol powered, race ready, totally refurbished..$10,600..(can be sold with gas engine instead of alcohol. Price would be negotiable)..Contact Bob Hall @ 704-732-1202 or 704-472-1700

***Yellow #36A totally refurbished alcohol Crosley engine, race ready $10,600..(can be sold with gas engine instead of alcohol. Price would be negotiable)..Contact Bob Hall @ 704-732-1202 or 704-472-1700

MISCELLANEOUS CARS--FOR SALE--MISCELLANEOUS CARS


NEW***23 BUCKET "T" STREET ROD/SHOW TROPHY WINNER..GARAGED ON JACK-STANDS FOR 14 MOS..396 CHROME CHEVY Big Block, AT, FULL TOP, BRASS TRIM, LOADED AND DONE RIGHT..$16,500..Contact Jim Work @ 904-563-3537


NEW***85 CHEVYROLET PICK UP...FULL CUSTOM. BAGGED, DIGITAL PW/PL/PB/PS/AC/AT. BLOWN CORVETTE LT1! VERY FAST AND GREAT FOR DAILY STREET DRIVING..THIS TRUCK HAS WON SEVERAL TROPHIES...FUEL CELL, CUSTOM INTERIOR..$18,500..Contact Jim Work @ 904-563-3537


NEW***Model A race car/ratrod project, had a '30 model a sedan body on it (sold), has very early 1st generation model A rear end with very rare franklin quick-change, early Ford front straight axle with lg alum drums on rear, roll cage etc..complete 105" wb chassis ..$695.oo cash, rear end alone is worth that..Contact Johnny Clay at kissclay73@hotmail.com (Kissimmee, Florida)--(IF YOU HAVE A PROBLEM CONTACTING JOHNNY CONTACT THE CLAY FAMILY AUTO SHOP AT 1200 SOUTH JOHN YOUNG PKWY, KISSIMMEE 34741..M-FRI 9AM-4PM. 407-846-1962 AND ASK FOR JOHNNY CLAY' BROTHER JEFFREY.)


NEW***1941 Ford Sedan..What a great race car body..Firm $500.00 Contact Ron Hess @ 386-547-4803 or 386-756-9144


NEW***1952 Chevy Sport Coupe, 305 cu in Chevy, turbo 350, newer rear end..Flame throwers and redone interior..Nice driver $7000.00 OBO Contact Ron Hess @ 386-547-4803 or 386-756-9144


***1936 Ford coupe body..Was going to be used as a stock car..Channeled some but solid-doors work..No floors..$2800.00 in New York..Contact Mark Reardon @ 315-866-3072 or E-mail Reardoncar1@yahoo.com Other cars available..


***1975 MGB..SINGLE BIG CARB..SETTING 8 YRS RUNNING WHEN PARKED..DELIVERY IS AVAILABLE...$1500..CONTACT GORDON BIRD @ (270)-242-6780 or bgbird@windstream.net

TRAILERS--FOR SALE--TRAILERS


NEW***2007 Pace American trailer, pulled 5,000 miles..Has E-track, ozite carpet, 10 ply tires, torsion bar suspension, 4 ft side door, extra ft in height, heavy duty back door, walk on roof and 5,000 lb winch..Asking $7495 Contact Ron Hess 386-547-4803


NEW***Heavy duty car or utility trailer, over all length 14.9" floor measurement are 10.1ft by 6ft..tongue mearsurement 4.6ft.,single axle/ 6 lugs 7'9.5 ft with lights and reflectors. Contact Jerry Hance @ 904-635-4452.


***BRAND NEW 24ft ENCLOSED CAR TRAILER, NEVER USED..ONLY $7495 Contact JIM HEILAND @ 612-889-2100

MISCELLANEOUS ITEMS--FOR SALE OR TRADE--MISCELLANEOUS ITEMS


NEW***10' x 20' Handi-House shed. 2009 model in immaculate condition..R19 insulation from top to bottom..New 5000 BTU AC window unit..55 inch door..Super solid 14' ramp will support anything you can drive or push onto it..Shed alone cost $3000.00..Asking $2500.00 or possible trade for enclosed trailer..Motivated seller in San Mateo, Florida. Contact Mike Paquin @ (706) 266-0666


NEW***READY TO RACE RONCO & VERTEX MAGNETO'S FOR BBC/SBC..$395.oo EACH FIRM..1-NEW MALORY DUAL POINT MANUAL ADVANCE ..$99.oo Contact Johnny Clay at kissclay73@hotmail.com (Kissimmee, Florida)--(IF YOU HAVE A PROBLEM CONTACTING JOHNNY CONTACT THE CLAY FAMILY AUTO SHOP AT 1200 SOUTH JOHN YOUNG PKWY, KISSIMMEE 34741..M-FRI 9AM-4PM. 407-846-1962 AND ASK FOR JOHNNY CLAY' BROTHER JEFFREY.)


NEW***This is a very nice light weight all alum custom made cart, 60" long x 24"wide, comes with adapter for atv/golf cart hitch..($350 to build)..selling for $150 firm..Contact Johnny Clay at kissclay73@hotmail.com (Kissimmee, Florida)--(IF YOU HAVE A PROBLEM CONTACTING JOHNNY CONTACT THE CLAY FAMILY AUTO SHOP AT 1200 SOUTH JOHN YOUNG PKWY, KISSIMMEE 34741..M-FRI 9AM-4PM. 407-846-1962 AND ASK FOR JOHNNY CLAY' BROTHER JEFFREY.)


NEW***4-15x10 ALUM, HAVE APPX 30 WHEELS THAT ARE: 15x7steel,15x8st,15x10st,15x12st,15x14alum, and 16x4st, and 4-16x10 alum some steel some alum and there are a few alum beadlocks..All will be priced $20 & up..ALSO HAVE LG ASSORTMENT OF ASPH SLICKS AND DIRT TIRES..Contact Johnny Clay at kissclay73@hotmail.com (Kissimmee, Florida)--(IF YOU HAVE A PROBLEM CONTACTING JOHNNY CONTACT THE CLAY FAMILY AUTO SHOP AT 1200 SOUTH JOHN YOUNG PKWY, KISSIMMEE 34741..M-FRI 9AM-4PM. 407-846-1962 AND ASK FOR JOHNNY CLAY' BROTHER JEFFREY.)


NEW***The Safer System™ works with almost any standard Butler, Richardson and Kirkey seat..The bolt-on additions give added support, comfort and safety around the head area, as well as around the shoulders..The add-on seat kit for old-style seats without head and rib protection..This kit will make an old seat much safer and bring it up to today’s standards..Pete was talking with Randy Lajoie at the PRI show in Orlando in December and he was complaining about old style seats not being very safe..This add-on bolt kit will rectify these safety issues and is an excellent safety feature as we get older..$450 for the kit..For more information..Contact Pete Silva @ (828) 273-0114 or e-mail petesilva@tampabay.rr.com


NEW***..New 15' X 15' Quick shade pop-up canopy, Red in color and never been used..$ 100.00 Contact Myron Cost @ 561-635-3949.


NEW***1–500 carb, 2 barrel, with choke horn and adapter plate..It’s by Competition Carb by Boyce Eckerd-$250,1-500 carb, 2 barrel, choke horn cutoff with flared adapter plate by Ben Barnes-$250, 1-650 carb, 2 barrel, choke horn cutoff, flared adapter plate by Fuel Curve-$300, Brand new, hand-held English wheel (the real Bill wheel)-$325 ($500 at CV)..Excellent for rolling sheet metal while still on the car, Leavitt Racing Products A-frame jig, brand new-$400 ($550 at CV), Alignment tools for W/5-$300, Balljoint sleeves-machined for rotor clearance-$5 ea., have several, will make a deal for all..Pieces to build pedal assemblies, aluminum and steel pieces, have pedal pads and bushings-$75 for all, 3-brand new 3” hypercoils 200-225-250 - $70 ea.; 1 used 300-$40, Steering tube brackets, could be used for many other things-$5 ea, Assorted trailing arm and A-frame brackets-make an offer, Assorted trackbar and swaybar pieces-$75 for all, Bassett Wheels-six, 5on5x5-1/2 offset, only one has much usage, one never used, two mounted, not raced-$300, 3-Diamond Wheels-w/5x5-1/2, excellent condition-$150, One brand new set of Ohlins..All four have high flow pistons..I never got a chance to bolt them on..These shocks would be in excess of $1,800+tx. Best offer OR Trades?..One set of Ohlins, not been run since redone..Have MX pistons and high flows..Best offer OR Trades?..Ohlin shock vises-$55 ea. Tie wraps, 14”, 100 count-$5 bag, Quartermaster, reverse mount bellhousing with mounts, starter and TO bearing-$450, New billett Pro-Comp distributor-$85, Aluminum shifter handles-$35 ea, Rivets-3/16, white and red, big head, small head, left hander style, blind rivets-$10 box, Clecos-1/8” and 3/16”-$20 bag (25 per bag), Cleco pliers, new and used-$5 used, $10 new, 1 used 31 spline float axle gun drilled 32-1/2” long-$35, Two 44-½” drive shafts with big yokes-$100 ea., 3 rearend pumps and mounting brackets-$175, Have several springs for sale, straight and barrel, Carrerra, Afco, Hypercoils and Landrum 5” springs, new and used-various prices, Two Modine oil coolers-$100 ea. ($175 for pair), Various Sierra and Outlaw calipers-$30-$60, Two old Hurst Airhart calipers; two old W/P calipers; two scp calipers with nickel plated front brackets, extra pucs, perfect for early race car restoration brakes-$125 takes all, Three 3-speed shifters-$35 ea., Various A-frames, 5-½” carbon fiber clutch-$1,200, Wide 5 hub, Wilwood style-$35, Used 5-½” clutch-$150, J Bar pinion plates, narrow and wide. Can run J Bar off the left or right side-$55 and $95, J Bars-$35, Fuel cell top, brand new-$200, Aluminum Strange 9” Ford third member. 650 gear with locker-$950, New 9” SCP rearend housing. 64-¼ flange to flange - $275, 3 in 1 brake shear roller. $250, Ellis 1600 series bandsaw. Over $2,500 new. $1,200, Have tons of other parts, if looking for anything, give me a call..Have individual photos of most parts listed, contact me and I can e-mail them. Building a ‘35-40 Ford Coupe vintage stockcar..May be willing to trade towards anything that would help with this project..Including old stock cars..If interested in any of these items..Contact Pete Silva @ (828)-273-0114 (cell)or e-mail petesilva@tampabay.rr.com


NEW***1970-1974 Ford 351 Cleveland engine completely rebuilt and dino tested @ 347 hp & 355 ft lbs torque..Aluminum valve covers, new HEI distributer, 600 Holley carb..Painted and pretty for your hot rod or vintage racer & ready to bolt in..$3200.00..CONTACT HANK BAKER @ 386-527-9659


***I would like to trade my really nice stump grinder, trailer, 066 Stihl chainsaw, hundreds of new & used spare cutter teeth and (not shown) is my new Schonstedt underground utilities locating equipment. Can also include my '95 3/4 ton Chevy diesel powered, std cab p.u. truck (dependable and exc. mechanical condition). WANT TO TRADE FOR a nice, clean dependable later model 1 ton dually crew cab p.u. truck, diesel or big block gas, (no high mileage). If interested please contact: Dave Jarrett, 407-438-4944 in Orlando, Fl.


***WILWOOD DYNALITE CALIPERS--NEW SINGLES & DOUBLES, LOBSTER CLAW BRAKES & OTHERS, WHEEL KNOCKOFFS, CAE IN/OUT BOX, PRESURE PLATES, SEAT BELTS, BRAKEHATS, TORQUE TUBE, RADIOUS AND TORSION BARS, STEERING WHEELS, SHOCK SPRINGS, OLD RADIATORS, OLD STEERING BOX, NEW HEADERS, FRONT STRAIGHT AXLE, NEW BIRD CAGE BEARINGS, NEW NOSE WING, FIBERGLASS TAIL, OLD STYLE SEATS..BEST OFFER..CONTACT VINCE CAPPELLI @ 941-315-0120


***15"5" wide rims for sale, 1 rim 3" offset, approximately 13" wide, 1 rim 3 1/2" offset, approximately 14" wide..Both rims inside and out were sandblasted, primed with epoxy and top coated with polyurethane..$130.00 for both..Two 2 inch receivers Reese type hitches..$25.00 each..One front hub and brake drum for 1936 Ford..$30.00..1965-1966 FORD MUSTANG COUPE TRUNK LID IN GOOD CONDITION..NEEDS PAINT..$75.00, 1965-1966 FORD MUSTANG COUPE DRIVERS DOOR WINDOW..GOOD CONDITION..$95.00..Contact Sumner DeWolf at 407-761-1161


***Offy intake manifold and 4 barrel Holly 690 duel pumper for Chevy inline 6 cylinder motor..$250.00..Contact Cornelius Spicer@ 941-758-0060


***15" DIRT & ASHPALT TIRES...SOME MOUNTED ON WIDE 5 WHEELS...12" & 13" MIDGET TIRES AND WHEELS... CALL JOE WAPPMAN @ (352) 796-3324


***6 cylinder 250 Chevrolet bored out to 270, roller cam, Crane springs, roller rockers, Vertex mag, all parts for fuel injection, 10 lb. flywheel $3500.00 contact Cal Kraemer @ 352-793-1637

WANTED--WANTED--WANTED


NEW***WANTED Holman-Moody wheels 15x8 " 5 on 5 bolt pattern..Contact: Tony Cassata tc72chev@aol.com


NEW***Looking for a compact CAE in and out box to incl. coupler and drive shaft if possible..Needed for my Beck sprinter restoration..CONTACT MIKE ANDERSON @ 317-729-2418 OR CELL 317-512-3914..


NEW***Looking for a 72 or older Camero body for a stock car? Contact Jim Heiland @ (612)-889-2100


***Wanted 8" Wide 5 wheels with 2" or 3" offset...Contact Al Jurowski @ 352-200-7204


***Needed to finish my 1965 Watson Indy Car (pictured above)..4 Halibrand Wheels.. 2-15"x8" with 3" to 4" Backspace..2-15"x10" with 4" to 5" Backspace..Also 4 Schroeder (Star of David) Wheels..Same size as above..Contact "Wild" Bill Davis @ 352-567-1781


***Looking for 1970's Weld Wheels 6 pin .8 hole. 24 bolt 15"x 15" or 15"x 14" or 15"x 13"..I Also need a hood for a 1976 Gambler Sprint..Contact Dave Cash @ 386-986-2030 or 386-931-1134 or e-mail flcash@aolcom..


***Looking for a 1955 Chevy rolling chassis or a turn key car with or without a motor..We are located in central Florida and are hoping to find one in reasonable driving distance..Call Cush Revette, Jr. @ 813-323-3606 or Dick Denoncore @ 561-310-1575

STOLEN--STOLEN--STOLEN


STOLEN***This 1968 Culbert Automotive Engineering (CAE) Sprint Car and enclosed trailer was stolen from the locked fenced in yard at Import Specialties 2100 Rosewood Dr. Columbia, SC the evening of October 8, 2009.

The race car and equipment was stored inside of a 2007 LA CARGO "FREEDOM" 7x16 foot Enclosed Trailer, Which was also stolen.

The Trailer: Serial #5TTBE16277D001946, white in color, equipped with tandem axles, a walk in door on the curb side and a ramp/door on the back, it may have some damage on the right side..THERE IS A REWARD..Contact Rich Hoffman at 803-788-7018 or 803-799-4401 Email: importspecialtie@bellsouth.net

Site Meter

Return to the DAARA Website

Copyright 2010 DAARA All Rights Reserved